cicadareward0

Sliding Patio Doors Repairs Your sliding glass patio doors provide natural light and boost your home's energy efficiency. However, over time they may begin to show signs of wear and tear that require some attention. Luckily, the majority of problems with sliding patio doors are simple to address. Learn more about how to keep your patio doors looking and working like new:. Tracks that are damaged or dirty Tracks One of the main causes of sliding patio doors that don't open is dirty or clogged tracks. Over time, the grit and grime from daily use accumulates on the track and can cause the door to become jammed or even fall apart completely. Regularly cleaning sliding doors and tracks as part of your household chores can help minimize this build-up. Start by brushing or vacuuming any big debris off the tracks and then wipe them clean using warm water and a non-abrasive cleaning product like dish soap. Vinegar can be added to your cleaning solution to get rid of stubborn grease and dirt staining. If your sliding door doesn't move smoothly after completing these steps, it may be the sign of more severe damage that requires professional repair or replacement. However, there are many easy fixes you could try before calling experts to save on costly repairs or replacements. It is important to put a doormat on the bottom of your sliding doors in order to catch dirt before it can reach the tracks. RepairMyWindowsAndDoors is also important to trim any plants or bushes close to your sliding doors in order to minimize the amount of debris that gets tracked into the tracks. Close the door properly to prevent damage to the rollers and wheels. By keeping your doors clean and well-lubricated, you will extend their life significantly. Misaligned Rollers Sometimes, a patio sliding may become out of alignment. This is usually due to dirt, or other obstructions which can be easily removed. Sometimes it's due to a bent roller or track. In this situation you can re-align the rollers by taking them off with the adjustment screws and cleaning with ruby alcohol. These parts can be fragile. If your doors are stuck, you can apply lubrication to the rollers. This will decrease friction and allow them to slide more easily. It is recommended to make use of a silicone-based lubricant since petroleum-based ones tend to draw dirt more quickly. It is also important to clean the tracks and rollers before applying lubricant. After cleaning the rollers you can put them back in place using their adjustment screws. It is recommended to use the same lubricant you used when cleaning them. When you are reinstalling the rollers be sure to push them all the way into their channels. You can then test your door to see if it now slides effortlessly. If the issue persists it could be necessary to take down your door and check the tracks and rollers for more significant problems. If the rollers or tracks are bent badly or bent, they may have to be replaced. In such a scenario, it's a good idea to call in an expert to install the tracks. Warped Glass Sliding glass doors are ideal for bringing in the outdoors and natural sunlight into a room, but they can also be susceptible to damage that requires repair or replacement. Cracks, warping and fading are just a few of the most frequently encountered issues. The materials that compose the sliding glass patio doors begin to degrade when exposed to sunlight, heat and other environmental elements. The most common cause of cracking is impacts, such as the impact of a lawnmowers or ball hitting into the door. Fading typically occurs because of repeated exposure to sunlight and other elements. If your sliding patio doors aren't easy to close or open, it could be an indication that their rollers and tracks aren't functioning properly. This problem may be caused by accumulated dirt or rust in the track or wheels, or by a lack or lubrication. This issue can be solved by regularly cleaning the tracks, rollers and removing obstructions. Another reason that sliding patio doors are difficult to open or close is because the locking mechanism has gone out of date. This could be caused by misalignment or wear and tear, but the solution is to adjust the locking mechanisms by using the adjustment screws located at the bottom of the track. Drafts or air leaks around your sliding patio door are a typical issue that can decrease the efficiency of your home's energy usage. These issues are typically caused by worn-out weather stripping or poor alignment of the door. This can be fixed easily by replacing the weather stripping, and re-aligning your doors. Loose Handle It can be frustrating when the handle of the sliding door is loose. It makes it difficult to open the door. The reason for this is a misaligned lock mechanism. It can be fixed by loosening and tightening the screws holding it in the correct position. A loose handle could be caused by the handle breaking off from the spindle that connects it to the inside or handles outside. This is usually the result of a combination of factors, including over use or wear and tear or simply the general aging. If the issue isn't addressed quickly, the handle can be loosened and fall off. The best way to fix this issue is to start by finding the screws that join the handles' exterior and interior. The screws are typically hidden behind tabs of plastic that can be removed with a flathead (or a Phillips head screwdriver in some instances) screwdriver. It's a good idea keep these screws safe to ensure that you don't lose them. After the handles have been removed, the next step is to take off the loose spindle. You can do this by pounding the ends of the spindle with a hammer until it is removed from its position inside the door. Then, the new handle can be put in place by simply putting the spindle through the hole in the interior handle and then inserting the other end of the spindle into the hole in the outside handle. Once the handle has been installed, tighten it by screwing back the screws and then check to ensure that the lock and unlock mechanism works correctly. Weatherstripping that isn't working properly Weatherstripping that's damaged or cracked may allow water and air to seep into your patio door, which can compromise your home's comfort and energy efficiency. In addition to allowing moisture, it can create drafts and also increase your heating or cooling costs. Fortunately, replacing faulty weatherstripping is a simple fix that doesn't require professional help. First, you need to remove the old stripping by either loosing its staples with an screwdriver or pinning it with the help of a putty knife before pulling it away from the door. Clean the area, and then apply a layer of weatherstripping which is secured with a foam seal. This will prevent leaks and increase the comfort of your. If your sliding patio door isn't functioning as it should, you must to fix the problem immediately to prevent further damage and keep them functioning for years to come. Depending on how serious the issue is the best option is an DIY solution or a professional repair/replacement could be the best choice. The majority of sliding patio door issues are caused by dirty rollers, misaligned tracks, or a loose handle. These issues are usually addressed by regular cleaning and maintenance including applying lubrication and adjusting the track and tightening the hardware. If these solutions do not work, you should seek professional advice in order to make sure that your patio is functioning just as it should. Before you decide to replace or repair your patio door, make sure to check its warranty information to ensure that it is covered by the manufacturer's warranty. This will save you money on repairs or replacements in the future.